Vertical extruding pipe machine

* Simple operation * To make products with average wall thickness * High compressive strength * Productivity: 30-100pcs/8h

Concrete pipe Machine

 Brief intruduction

a) HF vertical extruding pipe-making machine is the ideal equipment to manufacture cement pipe. Reasonable design, reliable and simple operation, accord with state standard GB11836-89.

b) The machine can be produced different sizes of tubular products by change mould.

c) Machine frame: Maganese steel with China national standard.

Advantages

a) average wall thickness, smooth inner and outer wall, good impermeability, high compressive strength, low cost, firm and reliable tie-in, convenient construction, high efficiency and release the mold immediately to maintenance, etc.

 Available raw materials

sand, gravel, stone chips, fly ash and slag mixed with appropriate amount of cement.

Applied Products

connection tubes, small tubes and large tubes used in agricultural irrigation, urban water supply and drainage.

Technical Specifications

Overall Dimension :	840×1700×4000 mm
Reducer rate :	1:5.8
Mould length :	800mm
Cycle Time :	Moulding cycle: 5-10min(depends on the dimenstion)
Whole power :	11.75kw
Motor Power :	7.5kw
Mould diameter (inside mm):	200mm, 300mm, 400mm, 500mm, 600mm, 700mm, 800mm, 1000mm
Wall Thickness:	30mm for dia 200mm,300mm, 40mm for dia 400mm, 50mm for dia 500mm, 60mm for dia 600mm , 70mm for dia 700 , 80mm for dia 800mm, 100mm for dia 1000mm
Speed of main shaft:	45 rolls / min

 Productivity(can change moulds)

30~100pcs / 8h

Vertical extruding pipe machine